Skip to main content
Skip table of contents

Settings

This section will detail the different settings on the settings page in administration. The table of contents below allows a quick navigation to the needed section.

Please see feature documentation for an in depth description of how a feature functions.

Allow Device Logout

This is an on or off setting indicated by the toggle switch on the right side of the page. When enabled as shown here:

Devices will be able to log out of EMS Loop which will subsequently deactivate them in your CAD system. If disabled shown here:

The users of the device will not be able to log out of EMS Loop in turn not deactivating them in your CAD system.

Allow Mobile Timestamps

Documentation in progress

Automatic Timestamp Settings

Geo location based automatic timestamp settings. If you do not see automatic timestamp settings in your administration settings console, please contact EMS Loop support to enquire about turning the feature on.

Auto Timestamp

This is an enabled or disabled toggle switch that indicates if geo location based timestamps are enabled for your system. If the toggle is disabled no automatic timestamp activity will occur. If the toggle is set to enabled,

Meters for Timestamp

This setting defines that distance (in meters) from the Pickup or Dropoff locations Geo coordinates that a vehicle must be in order for the Automatic Timestamp dialog to trigger.

Confirm Delay Time

This setting defines the number of seconds that the “Cancel Automatic Timestamp” button displays on a device when an automatic timestamp has been triggered.

MPH for Timestamp

This setting defines the miles per hour (MPH) that a device must be traveling before it can automatically be timestamped as En Route or Transporting. This value is used in combination with the meters for timestamp setting.

Auto Timestamp All Vehicles

If this setting is enabled, ALL vehicles in the system will be enabled for automatic timestamp functionality. If disabled you must select the vehicle that will be participating in automatic timestamp functionality in the Allowed Vehicles section.

Allowed Vehicles

This selection list allows you to choose the vehicles that you want automatic timestamps to be active for. This works in conjunction with Auto Timestamp All Vehicle. In order to select vehicles for automatic timestamps to be enabled for you must have Auto Timestamp All Vehicles disabled.

Disable Crew Survey

If enabled surveys for the crew members about their trip are disabled and the crew will not be presented with a survey to complete about the trip once complete.

Trip Sheet Settings

If enabled a trip sheet will be crated and the crew will be prompted for a signature at the status that is selected in the Timestamp for Signature selection box. Select the timestamp at which you desire the crew to be prompted for a signature.

Vehicle Type at Login

Documentation in progress

Survey Available At

Documentation in progress

Display Vehicle At

Documentation in progress

Call Type for Signature

Documentation in progress

Mobile Timestamps Settings

Documentation in progress

Individual Link Expires In Minutes

Documentation in progress

Individual Link Msg Text

Documentation in progress

Facility Link Message

Documentation in progress

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.